Several factors affecting the clarity of mouse pad patterns

After more than ten years of mouse pad processing, various intractable diseases have been encountered during the production process. The most common one is that the clarity of the pattern cannot reach the ideal state that the customer thinks, and the communication with the customer is too great. Too much. Customers always feel that it is caused by our inattention when we produce the mouse pad! At this time, the communication between the business and the customer becomes very difficult! Therefore, the various factors that affect the clarity of the mouse pad pattern are summarized as follows, so that everyone has a clear understanding before making the mouse pad, so as not to misunderstand everyone.

1. The effect of mouse pad cloth

There are many kinds of mouse pad fabrics, including fine surface, rough surface, bright surface, jacquard...Different fabrics, because the yarn thickness and weaving process are different, the printing effect will be different, and the fine surface will be clear. Some

2. The influence of the mouse pad design draft

The general format of the mouse pad design draft is: AI and CDR two formats are relatively high, the magnification is at least 300DPI, many customers provide pictures in JPG format, the most large, the pictures are completely virtual, and it is difficult for gods to handle it!

3. The impact of the mouse pad foam material

If the foam material of the mouse pad is too foamed or not foamed, it may cause the flatness of the foam material. If the material is not flat, it will greatly affect the clarity of the pattern.

4. Influence of transfer equipment

The type and speed, pressure, and temperature of the transfer equipment will have a great influence on the printing of the mouse pad, and cause great chromatic aberration.

5. The impact of workshop cleanliness

Pay special attention to the hygiene of the workshop. If the dust is very large and too dry, static electricity will be generated during the printing process, which will greatly increase the production of defective printing products. About 25 minutes, use a vacuum cleaner (machine, cloth surface, floor), and pay attention to hand cleaning. !

In any case, there is an essential problem: the printing on the cloth surface of the mouse pad will never achieve the effect of coated paper printing and computer display. I hope you can understand more! !